Adward | Seller | Plati-Online - Digital Store

Registered: 05.06.2011
Rating: 0

Positive responses: 9
Negative responses: 0

Sold: 284
Refunds: 2

Phone: 89324181558
WMID: 158771696516

Goods 210
Responses 6

2.7. For the scheme shown in Fig. 6, it is given that t

Automatic regulation of the oil level in the pressure t

1

An aluminum ball (A = 2.6) having a diameter of d = 4

The tank is divided into two compartments with a thin p

The tank is divided into two compartments with a thin p

Benzene with a flow rate of 200 t / h and an average te

1

In a closed tank A filled with oil, the pressure on the

Mercury and water are poured into the U-shaped vessel.

In the side vertical wall of the tank there is a rectan

In the water-jet pump, the overpressure at the supply o

In the bottom of a cylindrical tank filled with water t

In the bottom of the tank (Fig. 1) there is a hole with

1

In a closed tank, a constant gauge pressure is maintain

1

In the condenser of the steam engine (Fig. 1), water is

1

Water enters the heating boiler at a temperature of t1

2

In the flat vertical wall of the tank filled with water

A baffle is installed in a prismatic vessel of width b,

In the middle of the rectilinear section of the pressur

1

The vertical wall (Fig. 3.3), length l = 3 m (in the di

Water in an airtight conduit with a diameter of d = 0.4

Water flows from a closed vessel with an overpressure o

3

Water flows from the pressure tank through a pipeline w

1

Water from the river is fed through a gravity pipe of l

1

Water from node A to node B is supplied by three lines

3

Water flows from a closed pressure tank, where the exce

Water flows from the pressure tank A to the tank B thro

Water flows from the pressure tank, where the excess ai

1

Water is supplied through a horizontal pipeline compose

Water enters from reservoir A to reservoir B through a

Water at 20C (layer depth H) flows from an open tank to

27.05.2015 21:28:55

Качайте

15.05.2015 11:35:28

получил спасибо!

23.04.2015 20:38:29

Качественный чертеж, вопросов нет

30.01.2015 1:55:54

Спасибо тебе брат))) Выручил)

21.01.2014 22:22:56

Спасибо! все быстро и понятно

16.01.2014 11:57:11

Спасибо