UNLOCK CODE MEGAFON M100-1

The unlock code (NCK code) allows you to unlock the MEGAFON M100-1 router to work with SIM cards of any other operators.
Attention! A feature of this model is that the modem does not request the NCK code. You will need to send the code using a command in the terminal of the form AT + CLCK = "PN", 0.9396385 ", where 93963857 is the unlock code received from us. The code can be sent also using Putty, DC-Unlocke, Hyperterminal, Huawei Modem Terminal and others

******************BEFORE THE PURCHASE********************
1. Make sure you really have "MEGAFON M100-1".
2. Prepare IMEI-phone number. IMEI can be viewed by logging into the Web interface of the router in the field "Device Information", this is the necessary IMEI-code.
Alternatively - IMEI can be viewed on the cover under the battery (I strongly recommend using the first method, as in this method errors are possible in entering IMEI!)
3. Make sure that you can send the received code to the modem (see above).


**************** PROCEDURE FOR OBTAINING UNLOCK CODE ****************
After payment of the goods, you must fill out the form, indicating the following information:
1. Your email address (e-mail);
2. IMEI router (no errors)
Once again, carefully and without error, fill out the specified form and click the "Submit" button.

**************** LIABILITY CODE 5 minutes - 3 hours of work. *********************

ATTENTION! THIS IS NOT ONLINE SERVICE, DO NOT ORDER THE CODE, IF YOU CAN´T WAIT FOR THE DEFINED TIME!
Working hours are considered from 9-00 to 18-00 Moscow time. After this time and on Sunday, the code MAY be processed a little longer, but the code will be rest assured.
The unlock code is sent to your specified email address (e-mail).

************** UNLOCKING PROCESS OF MEGAFON M100-1 MODEM **************
1. After receiving the NCK unlock code, insert the SIM card of another operator into your phone. (If you have a PIN request on your SIM card, enter it.)
2. Run a program such as Terminal, select a modem port and send a code using a command in the terminal of the form AT + CLCK = "PN", 0.9396385 ", where 93963857 is the unlock code received from us. The code can also be sent using Putty programs DC-Unlocke, Hyperterminal, Huawei Modem Terminal, etc.
 
3.. Congratulations! Router successfully unlocked.


*****************ATTENTION!!!********************
Before making a purchase, it is strongly recommended to check whether you can send the unlock code to the modem using the AT command when a SIM card of another operator is installed.
By making a purchase you agree that the model of your router MEGAFON M100-1, and also whether you can send the unlock code to the modem using the AT command.
If, after making a purchase code, it turns out that you can not send the unlock code to the modem using the AT command, an error occurred when entering IMEI - the funds are non-refundable!
The efficiency of the code is guaranteed on the "factory" firmware.
ATTENTION!

DO NOT ORDER THE CODE IF something is not clear in the UNLOCK PROCEDURE!
The service is considered to be 100% complete and return in such cases is NOT PROVIDED !!!!