Warface 16 Bloody X7 macros CCR Elite | ACR Elite
Content: warface.s16.elite.ACR.zip (12.48 KB)
Uploaded: 02.06.2016
Positive responses: 2
Negative responses: 0
Sold: 14
Refunds: 0
$0.81
The best macros for a good game of Warface! Flumbix man professional creator macros Warface for Bloody and X7, has extensive experience and knowledge 2013 "how to write high-quality macros" for online games! Macro is not a cheat, it´s a good emulation of the movement of the mouse in the game! Good buy and good game!
Before purchasing, carefully review all the information about the product macros from Flumbix, view screenshots of the content pack on the video or the screenshots quality – accuracy / precision macro! The macros work only for gaming mouse A4TECH & Bloody built-in memory for macros! Macros for A4Tech have the extension *.amc and Bloody *.mgn.
If You buy macros for simple or not gaming mouse A4TECH / Bloody, You should be sure on 100% that IN MacrosEffects or another emulator coincides with macros X7 and works correctly on your computer!
The suppression of axial recoil in the macro you configured for computers with the current system requirements for games, and is designed for a maximum load in the game and if your computer does not meet the minimum system requirements that are not always actually stated in the description for the games, the macro may not work properly, because in the game you definitely have lag (Lag is the delay in the game), and from Flumbix macros for A4TECH X7 Bloody mouse is handled consistently regardless of the system and lags in the game and so the behavior of the macro does not match the time in the game!
Make sure that your ON Bloody unlocked 3 core or your mouse is A4Tech X7 supports built-in memory for macros and is determined BY the original Oscar Editor and it is very important that you have a widescreen monitor 16:9 / 16:10 or ultra wide monitor 21:9, format 5:4 in some cases, macros may not work correctly and claims after receipt of the goods will not be accepted! All macros from Flumbix tested and checked by the author on different graphics settings and resolution with a widescreen 21:9, 16:9 and 5:4!
Macros and the digital goods as they are subject are not material, are non-refundable, before purchasing, carefully review the accuracy / precision and what is important to be prepared for the fact that the latter in rare cases may slightly vary due to incompatibility of hardware and software of the PC.
Macros from FlumBix written and tested with the following configuration:
• Motherboard: MSI Z97 PC Mate;
• Processor: Intel Core i5-4690К 3500MHz;
• Video card: Zotac AMP! Omega core edition 4Gb GTX 970;
• RAM: HyperX Savage CL9 8Gbx2 1600MHz - 16Gb Dual-Channel;
• Storage: Western Digital Caviar Black 1000Tb;
• Power supply: Aerocool Stryke X 600 80+ Bronze 600W;
• Case: Aerocool Stryke X Coupe ATX;
• Operating system: Microsoft Windows 8.1 x64 single language;
• Mouse A4TECH F3 V-Track, the polling rate / 1Ms MRR 1000MHz;
• V8M Bloody mouse Core3 Activated version, MRR 1000MHz 1Ms, Bloody5 2015.06.16;
• Monitor LG LG 25UM57-P IPS 2560x1080 5ms;
• Monitor SAMSUNG SyncMaster 931c 2ms 1280x1024.
Macros from Flumbix on the marketplace for actual use!
When you see the problem with the setup, email me! When applying be sure to send me screenshots of the settings and screenshots of bullet marks on the wall where I can see the offense return and be ready to install the program remotely configure the macro via TeamViewer http://teamviewer.com/ru/download/windows.aspx
Write to me strictly through https://www.oplata.info to login to use mail through which you bought the macro set!
Before purchasing, carefully review all the information about the product macros from Flumbix, view screenshots of the content pack on the video or the screenshots quality – accuracy / precision macro! The macros work only for gaming mouse A4TECH & Bloody built-in memory for macros! Macros for A4Tech have the extension *.amc and Bloody *.mgn.
If You buy macros for simple or not gaming mouse A4TECH / Bloody, You should be sure on 100% that IN MacrosEffects or another emulator coincides with macros X7 and works correctly on your computer!
The suppression of axial recoil in the macro you configured for computers with the current system requirements for games, and is designed for a maximum load in the game and if your computer does not meet the minimum system requirements that are not always actually stated in the description for the games, the macro may not work properly, because in the game you definitely have lag (Lag is the delay in the game), and from Flumbix macros for A4TECH X7 Bloody mouse is handled consistently regardless of the system and lags in the game and so the behavior of the macro does not match the time in the game!
Make sure that your ON Bloody unlocked 3 core or your mouse is A4Tech X7 supports built-in memory for macros and is determined BY the original Oscar Editor and it is very important that you have a widescreen monitor 16:9 / 16:10 or ultra wide monitor 21:9, format 5:4 in some cases, macros may not work correctly and claims after receipt of the goods will not be accepted! All macros from Flumbix tested and checked by the author on different graphics settings and resolution with a widescreen 21:9, 16:9 and 5:4!
Macros and the digital goods as they are subject are not material, are non-refundable, before purchasing, carefully review the accuracy / precision and what is important to be prepared for the fact that the latter in rare cases may slightly vary due to incompatibility of hardware and software of the PC.
Macros from FlumBix written and tested with the following configuration:
• Motherboard: MSI Z97 PC Mate;
• Processor: Intel Core i5-4690К 3500MHz;
• Video card: Zotac AMP! Omega core edition 4Gb GTX 970;
• RAM: HyperX Savage CL9 8Gbx2 1600MHz - 16Gb Dual-Channel;
• Storage: Western Digital Caviar Black 1000Tb;
• Power supply: Aerocool Stryke X 600 80+ Bronze 600W;
• Case: Aerocool Stryke X Coupe ATX;
• Operating system: Microsoft Windows 8.1 x64 single language;
• Mouse A4TECH F3 V-Track, the polling rate / 1Ms MRR 1000MHz;
• V8M Bloody mouse Core3 Activated version, MRR 1000MHz 1Ms, Bloody5 2015.06.16;
• Monitor LG LG 25UM57-P IPS 2560x1080 5ms;
• Monitor SAMSUNG SyncMaster 931c 2ms 1280x1024.
Macros from Flumbix on the marketplace for actual use!
When you see the problem with the setup, email me! When applying be sure to send me screenshots of the settings and screenshots of bullet marks on the wall where I can see the offense return and be ready to install the program remotely configure the macro via TeamViewer http://teamviewer.com/ru/download/windows.aspx
Write to me strictly through https://www.oplata.info to login to use mail through which you bought the macro set!
https://www.youtube.com/watch?v=2b45_Ukm2F8
Before buying, see video or screenshots of control the recoil and characteristics of the weapons in the game. All submitted macro at the correct setting in aim the bullet fly in a "point" with a minimum spread, in addition to weapons whose accuracy in aiming below the "31" and sniper rifles and shotguns, the lower the value of 31 the variation from the center more!
Note, when the precision value of the 31 possible easy random recoil, as in the Arsenal of the game most weapons have a random drawing of the recoil, this is especially true for the assault class, and if weapons parametric recoil, at exactly 31 shooting in the dot is limited to 1/3 or 1/2 of the store, the rest in random uncontrolled recoil!
All macros tested, checked a closed VIP group (accessed in the near future which is closed), for correct function, carefully read and strictly follow the recommendations! Write to me strictly through https://www.oplata.info to login using mail through which purchased this set of macro!
1. Change in the game SETTINGS - controls: Sensitivity - 16.
For assault and engineer when replacing a module "Handguard" with rare on lower level
or barrel-attached grenade launcher be sure to up the sensitivity in the game!
2. In Windows go to control panel -> Run "Mouse" -> Open the tab "pointer Options" ->
Move -> Set "pointer Speed" in position 6
be sure to uncheck "Enable enhanced pointer precision".
3. Change in the game SETTINGS - graphics: Resolution - any,
at the time of setting the macro be sure to set the following graphics settings -
ENABLE Adaptive quality and Full screen mode, everything else OFF
quality set to MEDIUM Detail (for visible traces of bullets on the wall),
and the rest is all on low after configuration, you can return to your usual.
4. If the polygon in a test shooting on a wall, the work of macro is different,
adjust "sensitivity" in the game is as follows - if down - decrease sensitivity
but if up - increase the sensitivity.
5. Everything is ready, configure the sensor for X7 mouse DPI or CPI for Bloody comfortable to play.
All previously described on the store page!
If you still have trouble for setting up, take a look video guide installation and setup macro http://www.flumbix.com/macros/warface/video-setting-warface.html
Macros have a digital page at the beginning of the name to sort by class in the game!
1 - weapon for ASSAULT
2 - weapons for the MEDIC
3 - weapons for the ENGINEER
4 - a weapon for the SNIPER
An explanation of the abbreviations:
x"digits" is the magnification used in the macro scope
LKM - a macro to the Left Mouse Button
ARC - automatic right-click the mouse, auto sign-in aiming, the first shots have variation!
BurstFire - shooting cut offs
SOFT script on the technology of reducing vibration - soft
S-SOFT script on the technology of reducing the vibration is as smooth as possible
PRO PVE - proclick
Hybrid - a hybrid macro - spray rolling in proclick
Cut - module a bayonet (using random recoil)
Recoil.plus - reduced accuracy
In case of not work correctly, before you contact me, please kindly double check the settings of paragraph 1, and use the recommendations in paragraph 4 and that it is IMPORTANT sighting device consistent with the macro! Contact me strictly through https://www.oplata.info to login using mail through which purchased this set of macros!
Before buying, see video or screenshots of control the recoil and characteristics of the weapons in the game. All submitted macro at the correct setting in aim the bullet fly in a "point" with a minimum spread, in addition to weapons whose accuracy in aiming below the "31" and sniper rifles and shotguns, the lower the value of 31 the variation from the center more!
Note, when the precision value of the 31 possible easy random recoil, as in the Arsenal of the game most weapons have a random drawing of the recoil, this is especially true for the assault class, and if weapons parametric recoil, at exactly 31 shooting in the dot is limited to 1/3 or 1/2 of the store, the rest in random uncontrolled recoil!
All macros tested, checked a closed VIP group (accessed in the near future which is closed), for correct function, carefully read and strictly follow the recommendations! Write to me strictly through https://www.oplata.info to login using mail through which purchased this set of macro!
1. Change in the game SETTINGS - controls: Sensitivity - 16.
For assault and engineer when replacing a module "Handguard" with rare on lower level
or barrel-attached grenade launcher be sure to up the sensitivity in the game!
2. In Windows go to control panel -> Run "Mouse" -> Open the tab "pointer Options" ->
Move -> Set "pointer Speed" in position 6
be sure to uncheck "Enable enhanced pointer precision".
3. Change in the game SETTINGS - graphics: Resolution - any,
at the time of setting the macro be sure to set the following graphics settings -
ENABLE Adaptive quality and Full screen mode, everything else OFF
quality set to MEDIUM Detail (for visible traces of bullets on the wall),
and the rest is all on low after configuration, you can return to your usual.
4. If the polygon in a test shooting on a wall, the work of macro is different,
adjust "sensitivity" in the game is as follows - if down - decrease sensitivity
but if up - increase the sensitivity.
5. Everything is ready, configure the sensor for X7 mouse DPI or CPI for Bloody comfortable to play.
All previously described on the store page!
If you still have trouble for setting up, take a look video guide installation and setup macro http://www.flumbix.com/macros/warface/video-setting-warface.html
Macros have a digital page at the beginning of the name to sort by class in the game!
1 - weapon for ASSAULT
2 - weapons for the MEDIC
3 - weapons for the ENGINEER
4 - a weapon for the SNIPER
An explanation of the abbreviations:
x"digits" is the magnification used in the macro scope
LKM - a macro to the Left Mouse Button
ARC - automatic right-click the mouse, auto sign-in aiming, the first shots have variation!
BurstFire - shooting cut offs
SOFT script on the technology of reducing vibration - soft
S-SOFT script on the technology of reducing the vibration is as smooth as possible
PRO PVE - proclick
Hybrid - a hybrid macro - spray rolling in proclick
Cut - module a bayonet (using random recoil)
Recoil.plus - reduced accuracy
In case of not work correctly, before you contact me, please kindly double check the settings of paragraph 1, and use the recommendations in paragraph 4 and that it is IMPORTANT sighting device consistent with the macro! Contact me strictly through https://www.oplata.info to login using mail through which purchased this set of macros!
08.01.2016 1:26:41
Красава! Все отлично работает
21.07.2015 9:08:00
всё окей!